Comfort and ergonomics, a wining combination

New Perkins 1100 series "Euro 2 / USA TIER 2" engines with forward tilting hood
The new Perkins 1103 (3-cylinder) and 1104 (4-cylinder) aspirated and turbocharged engines, deliver 58.5, 68.2, 81.6, 91.9 and 98.6 HP (ISO).
They offer high torque backup, improved fuel efficiency, low noise and reduced emissions.
The forward tilting hood provides easy access to the engine for routine service and maintenance <=

Front axle of latest generation
The four-wheel drive front axle with 55' steering angle features oil-immersed disc brakes which, combined with the action of the rear brakes, ensure effective integral braking on all four wheels

 

Modular transmission available in three versions
The modular transmission can be supplied in three versions. The basic transmission (12 FWD+ 12 REV) can be equipped with either an overdrive (40 km/h) or a creeper providing a total of 24F WD + 12 2 REV speeds



Dashboard with analogue instruments and reverse power shuttle lever applied to the steering wheel
The stylish dashboard features analogue instruments allowing simple and fast reading of all the information necessary for proper use of the tractor and implements.
Integrated in the steering wheel in comfortable and ergonomic position, the reverse power shuttle lever enables reversal of all gears available. The same lever allows engagement of either the overdrive (40 km/h) or the creeper, which can be mounted on transmission upon request


Twin Lock. simultaneous rear and front diff-locks
The simultaneous lock of the rear and front differentials is electro-hydraulically
operated by button (fig. E) ensuring effective four-wheel drive.







Driving seat mounted on suspended platform for enhanced comfort (fig. 1)
The driving seat is mounted on a platform suspended on silent-blocks and equipped with an adjustable sprung seat.
The hydraulic steering and the height adjustable steering wheel further improve the comfort.
The foldable two-post ROPS can be optionally equipped with sunroof.

High-performance hydraulics for power lift and auxiliary valves
The hydraulic system provides a maximum total flow rate of 82 litres/min.

The mechanical power lift, equipped with a cat. 2 three-point linkage (fig. F-H) proides position, draft, intermix and floating control functions while ensuring a maximum lifting capacity of 4350 kg. The standard equipment includes 2 simple- and double-acting auxiliary valves (fig. G).